microdermabrasion diamond peel machine
Diamond Microdermabrasion Hot / Cold Treatment 2 In 1 Beauty Machine For Skin Peeling
Microdermabrasion machine ( 2 in 1 )
Diamond microdermabrasion + hot&cold treatment 2 in 1
The Micro-crystal Dermabrasion was designed by Italian Florence's Mattioli at first, until now had over 20 years’ history. This kind of technology only supplies to the dermatology expert and doctor at first uses, but more and more SPA House & Beauty Saloon also gradually uses, it was called the best method of medical beauty. This method successfully has developed in Europe for several years, cures patient thousands of examples, and has obtained the extremely satisfactory effect.
Now we want to introduce the Diamond Dermabrasion, it is a creative improvement of the Micro-crystal Dermabrasion. The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin back up. This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage of Diamond Dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health. The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin.
The hot & cold treatment function.
The cold treatment function is specially designed for claming down the skin after peeling. The skin is sensitive after peeling treatment, so the cold treatment procures is necessary. The hot treatment function is designed for accelerating the absorption of nutrition.
Hot & cold treatment instruction
1.Connect the hot & cold plug to the machine; please note the socket is
in the “Hot & Cold” Area.
2.Start the machine: To turn on the machine, press the “on” button.
And then start the hot & cold treatment function.
3.Please wait 3 minutes, and then you can apply the treatment. For
the machine need time to warming up or cool down the treatment probe.
4.Normally one treatment program is about 5 ~10 minutes. Please note
that do not stay in one treatment place over time when applying the
treatment to avoid any hurt caused by cool head.
5.After treatment, please turn off the machine and then pull out the
plug, make clean the probe.
6. Do not modify or attempt to repair the machine, contact the
technician for maintenance.
Voltage: 240V/50/60Hz 220V/50/60Hz 115V/60Hz
Power: 65 VA
Packing size:42*37*29 Gross weight:6kg
Contact Person: Mr. Judy Jiang